ATtiny26-16SI - ATtiny26 20-Pin 16MHz 2kB AVR Microcontroller

Utilizes the AVR RISC Architecture

High-performance and Low-power 8-bit RISC Architecture

• - 118 Instructions - Most Single Clock Cycle Execution
• - 32 x 8 General-purpose Working Registers + Peripheral Control Registers
• - Up to 16 MIPS Throughput at 16MHz
• - Fully Static Operation

Data and Nonvolatile Program Memory

• - 2k Bytes of In-System Self-Programmable Flash
• - 128 Bytes EEPROM
• - 128 Bytes Internal SRAM
• - Programming Lock for Flash Program and EEPROM Data Security

Peripheral Features

• - On-chip Analog Comparator
• - Programmable Watchdog Timer with Separate On-chip Oscillator
• - 8-bit Timer/Counter with Separate Prescalar, Compare
• - 8-bit High-Speed Timer with Separate Output Compare Register
• - Universal Serial Interface with Start Condition Detector
• - External Interrupt
• - Pin Change Interrupt on 11 Pins

Special Microcontroller Features

• - Power-on Reset and Programmable Brown-out Detection
• - In-System Progammable via SPI Port
• - External and Internal Interrupt Sources
• - Low Power Idle, Noise Reduction and Power-Down Modes
• - Internal Calibrated RC Oscillator

Specifications

• - Low-power, High-speed CMOS Process Technology
• - 0-16MHz for ATTiny26
• - 4.5-5.5V for ATTiny26
• - 16 Programmable I/O Lines
• - 20-pin PDIP/SOIC