ATMEGA32-16PU - ATMega32 40-Pin 16MHz 32kb 8-bit Microcontroller - Buy ATMEGA32-16PU

Utilizes the AVR RISC Architecture

High-performance and Low-power 8-bit RISC Architecture

• - 131 Instructions - Most Single Clock Cycle Execution
• - 32 x 8 General Purpose Working Registers
• - Up to 16 MIPS Throughput at 16MHz
• - Fully Static Operation
• - On-chip 2-cycle Multiplier

Data and Nonvolatile Program Memory

• - 32k Bytes of In-System Self-Programmable Flash
• - Optional Boot Code Section with Independent Lock Bits
• - 1024 Bytes EEPROM
• - 2K Bytes Internal SRAM
• - Programming Lock for Software Security

JTAG Interface

• - Boundary-scan Capabilities According to the JTAG Standard
• - Extensive On-chip Debug Support
• - Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface

Peripheral Features

• - On-chip Analog Comparator
• - Programmable Watchdog Timer with Separate On-chip Oscillator
• - Master/Slave SPI Serial Interface
• - Two 8-bit Timer/Counters with Separate Prescalar, Compare
• - One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture mode
• - Real Time Counter with Separate Oscillator
• - Four PWM Channels
• - Programmable Serial USART
• - 8-channel, 10-bit ADC
• - Byte-oriented Two-wire Serial Interface

Special Microcontroller Features

• - Power-on Reset and Programmable Brown-out Detection
• - Internal Calibrated RC Oscillator
• - External and Internal Interrupt Sources
• - Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby

I/O and Packages

• - 32 Programmable I/O Lines
• - 40-pin PDIP

Operating Voltages

• - 4.5-5.5V for ATmega32

Speed Grades

• - 0-16MHz for ATmega32