×
Futurlec - The Electronic Components and Semiconductor Superstore
View Cart


7486 - 7486 Quad EXCLUSIVE-OR Gate Datasheet

Photograph
7486 Quad EXCLUSIVE-OR Gate

Product Details

The 7486 IC or IC 7486 is a 2-Input EXCLUSIVE OR Gate IC with Four Independent Gates in the IC. The 7486 is a 14 pin IC with the power supply and ground pins at pin 14 and pin 7 respectively. The 7486 pin diagram or 7486 pinout is shown below.

Features

  • Four 2-Input Exclusive OR Gates
  • Outputs Directly Interface to CMOS, NMOS and TTL
  • Large Operating Voltage Range
  • Equivalent to SN7486N and DM7486N
  • Not Recommended for New Designs Use 74LS Series - 74LS86 IC

Pin Layout
TTL 7486 Pin Layout

Pin Description
Pin Number Description
1 A Input Gate 1
2 B Input Gate 1
3 Y Output Gate 1
4 A Input Gate 2
5 B Input Gate 2
6 Y Output Gate 2
7 Ground
8 Y Output Gate 3
9 A Input Gate 3
10 B Input Gate 3
11 Y Output Gate 4
12 A Input Gate 4
13 B Input Gate 4
14 Positive Supply

Truth Table
Input Output
A B Y
L L L
L H H
H L H
H H L

Dimensional Drawing
DIP14 IC Dimensional Drawing

Technical Data

Absolute Maximum Ratings

Supply Voltage 7V
Input Voltage 5.5V
Operating Free Air Temperature 0°C to +70°C
Storage Temperature Range -65°C to +150°C

Recommended Operating Conditions

Symbol Parameter Min Typ Max Units
Vcc Supply Voltage 4.75 5 5.25 V
Vih HIGH Level Input Voltage 2     V
Vil LOW Level Input Voltage     0.8 V
Ioh HIGH Level Output Current     -0.4 mA
Iol LOW Level Output Current     16 mA
Ta Free Air Operating Temperature 0   70 °C

Electrical Characteristics

Symbol Parameter Conditions Min Typ Max Units
Vi Input Clamp Voltage Vcc=Min Ii=-12mA     -1.5 V
Voh HIGH Level Output Voltage Vcc=Min Ioh=MAX Vil=MAX 2.4 3.4   V
Vol LOW Level Output Voltage Vcc=Min Iol=MAX Vih=MAX   0.2 0.4 V
Ii Input Current@MAX Input Voltage Vcc=Max Vi=5.5V     1 mA
Iih HIGH Level Input Current Vcc=Max Vi=2.4V     40 µA
Iil LOW Level Input Current Vcc=Max Vi=0.4V     -1.6 mA
Ios Short Circuit Output Current Vcc=Max -18   -55 mA
Icch Supply Current with Outputs HIGH Vcc=Max   4 8 mA
Iccl Supply Current with Outputs LOW Vcc=Max   12 22 mA

Switching Characteristics at Vcc=5V,Ta=25°C

Symbol Parameter Conditions Min Typ Max Units
tplh Propagation Delay Time LOW-to-HIGH Level Output Cl=15pF Rl=400R     22 nS
tphl Propagation Delay Time HIGH-to-LOW Level Output Cl=15pF Rl=400R     15 nS