Motorola 68HC908 Programmer

Our Motorola Programmer is a great development tool for the 68HC908 range of microcontrollers from Motorola. Can program the very popular 68HC908GP32 microcontroller and also the 68HC908JL3, JK1 and JK3. Unit comes complete in a study case, with indication leds for unit status. Will work with the new 68HC908 development boards, for program download and modification in-circuit. Easy to use software runs on Windows 95 and 98. Manual is included. Power supply is not included, will work with a 10-12Vdc 800mA plugpack, with negative pin and positive shield.
Please note: Requires one of the adaptors below for programming, purchased separately.

Part Code: MOTOPROG

Features

Can program the 68HC908GP3, 68HC908JK1, 68HC908JK3 and 68HC908GP32
Small and Lightweight Unit
Easy to Use Software
Can read, verify and program contents of Microcontroller
Connects to standard Computer Serial Port

Out of Stock

68HC908GP32 Adaptor

40 Pin adaptor for the 68HC908GP32 microcontroller. Fits directly in the above programmer and enables copying, reading and programming of the 68HC908GP32 microcontroller. ZIF socket is used for easy removal and mounting of the microcontroller.

Part Code: GP32ADAP

Out of Stock

68HC908JL3 Adaptor

28 Pin adaptor for the 68HC908JL3 microcontroller. Fits directly in the above programmer and enables copying, reading and programming of the 68HC908JL3 microcontroller. ZIF socket is used for easy removal and mounting of the microcontroller.

Part Code: JL3ADAP

Out of Stock

68HC908JK1,JK3 Adaptor

20 Pin adaptor for the 68HC908JK1,JK3 microcontrollers. Fits directly in the above programmer and enables copying, reading and programming of the 68HC908JK1,JK3 microcontroller. ZIF socket is used for easy removal and mounting of the microcontroller.

Part Code: JK1ADAP

Out of Stock