ATMEGA8A-PU - ATmega8 28-Pin 16MHz 8kb 8-bit Microcontroller - Buy ATMEGA8A-PU

Advanced RISC Architecture

High-performance and Low-power 8-bit RISC Architecture

• - 130 Instructions - Most Single Clock Cycle Execution
• - 32 x 8 General Purpose Working Registers
• - Up to 16 MIPS Throughput at 16MHz
• - Fully Static Operation
• - On-chip 2-cycle Multiplier

Data and Nonvolatile Program Memory

• - 8k Bytes of In-System Self-Programmable Flash
• - Optional Boot Code Section with Independent Lock Bits
• - 512 Bytes EEPROM
• - 1K Bytes Internal SRAM
• - Programming Lock for Software Security

Peripheral Features

• - On-chip Analog Comparator
• - Programmable Watchdog Timer with Separate On-chip Oscillator
• - Master/Slave SPI Serial Interface
• - Two 8-bit Timer/Counters with Separate Prescalar, Compare
• - One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture mode
• - Real Time Counter with Separate Oscillator
• - Three PWM Channels
• - Programmable Serial USART
• - 6-channel, 10-bit ADC
• - Byte-oriented Two-wire Serial Interface

Special Microcontroller Features

• - Power-on Reset and Programmable Brown-out Detection
• - Internal Calibrated RC Oscillator
• - External and Internal Interrupt Sources
• - Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down and Standby

I/O and Packages

• - 23 Programmable I/O Lines
• - 28-pin PDIP, 32-lead TQFP, and 32-pad MLF

Operating Voltages

• - 4.5-5.5V for ATmega8

Speed Grades

• - 0-16MHz for ATmega8

Power Consumption at 4 Mhz, 3V, 35 °C

• - Active: 3.6mA
• - Idle Mode: 10mA
• - Power-down Mode: < 0.5µA